GET FREE SHIPPING!
When you order
$250 $100 or more.
Out Areas: Call for a quote.
INFLATABLE BOTTOM SPRAY™ is the World’s 1st Boat Bottom Cleaner for Inflatable Boats. It is Safe on Hypalon, PVC, Fiberglass, Rubber and Vinyl. INFLATABLE BOTTOM SPRAY™ Removes Algae, Barnacles, Zebra Mussels. It is Easy to Use – Spray On, Brush Lightly and Rinse Clean.
Spray directly onto marine growth, brush & rinse away.
Inflatable Boat Bottom Spray can be used on Hypalon, PVC, Fiberglass & Aluminum.
A Clean Boat Bottom Equals Better Performance.
INFLATABLE BOTTOM SPRAY™ is a special Inflatable boat cleaner for cleaning algae off inflatable boats and dinghies. It penetrates through the algae and breaks the bond with the boat for easy removal. Spray it on. Allow it to work. Scrub and power wash or spray your boat clean. Look at this poor rigid inflatable boat that’s been neglected for over 3 years. It’s dirty, gummy and stained with diesel. INFLATABLE BOTTOM SPRAY™ got the algae off In no time. Next, SPEED CLEAN™ boat cleaner got the Yuck off. Quickly and easily. Poly Guard inflatable boat protective coating made the tubes shine better than new. REPELIN™ clear polymer fouling relase coating provides invisible protection against marine fouling. It’s a green alternative to antifouling paint. Aurora System matched products work together to give you the same restoration, cleaning and protection results that professionals get while saving you time and effort. You’ll love how your inflatable boat looks.
Keeping your new RIB or Inflatable Boat clean and protected against environmental damage can easily double the useful life of your boat, keep it looking like the day you bought it, increase your pride of ownership and bring a much higher return when it comes time to trade up or sell.
Your boat will be expected to live and survive in the Marine Environment; the toughest environment on the planet. It will be under constant attack from dirt, grime, UV, infrared, suntan lotion, marine growth, bacteria, bird and spider droppings, scuffs, stains, ozone and more. A simple and regular maintenance regime can easily defeat these ravages, but you need the right specialty products and procedure to do the job. Failure to keep your boat clean and protected will result in it looking old and tired before its time, may void your warranty and is sure to bring additional problems that can be costly to repair.
Using the right products to care for your boat is important. Household, automotive and industrial products can often cause more harm than good and should not be used. Aurora Boat Care Products are specially formulated for optimum care and maintenance of RIB and Inflatable boats. They’re endorsed, recommended and used by the top boat manufacturers in the world. These products are safe to use on Hypalon, PVC, Polyurethane, Rubber, Fiberglass and Aluminum.
NOTE: Detailed instructions for use and application of all products are on the product labels and on www.AuroraMarine.com
This is the easiest and best time to protect your boat. Within a few months in the marine environment, an unprotected boat can become soiled, stained, fouled and begin to degrade, requiring restoration before it can be properly protected.
When the special fabric for your tube and inflatable floor was manufactured, lubricants and other chemicals were used and they remain on the surface of the fabric after the boat was manufactured. It’s important to strip them away before applying the UV protector otherwise poor adhesion and failure of the protector can result. Even though your boat is new and appears clean, scrub it well with SPEED CLEAN™ and a MARINE POWER MITT™ to remove these pollutants, rinse well and dry. When the tube and fabric floor is dry, apply 2 coats of POLY GUARD™. These products may also be used to protect rub rails and other rubber fitments.
If the boat is to remain in the water for more than 2 days at a time, apply REPELIN™ fouling release coating to all underwater fabric surfaces to reduce the attachment of marine fouling and make cleanup easier. REPELIN™ can also improve performance and reduce fuel consumption. These products are effective for use in salt as well as fresh water.
If your RIB is to remain in the water for more than 2 days at a time, protect the gel coat with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Gel coat is porous and REPELIN™ will seal the pores to prevent osmosis blisters.
New gel coat is coated with a mold release agent which can impair proper bonding of long lasting protective coatings. To ensure proper attachment of REPELIN™, the hull must be scrubbed with SPEED CLEAN™ and a MARINE POWER MITT™ to remove any pollutants, prior to application.
If your RIB is to remain in the water for more than 2 days at a time, protect the painted bottom with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Wash the surface first with INFLATABLE BOAT CLEANER™ to remove any pollutants and then apply 2 coats of REPELIN™. If the hull is raw aluminum, after washing as above, coat it first with ALUMETRON™ prior to applying REPELIN™.
The deck or floor surfaces of RIB’s either have a textured pattern or sand is imbedded in the gel coat, or paint, in order to provide traction and reduce slipping, especially when wet. Protecting them with wax or polish is not recommended as it can make them dangerously slippery. Left unprotected, the decks are susceptible to UV damage, soiling, staining and excessive scrubbing to keep them clean. SURE STEP™ is a pressure sensitive sealer and UV protective polish that utilizes Adaptive Reflex technology. It seals the surface, protects the New Boat shine and makes the decks easy to maintain and keep clean. When you step on the deck, your weight creates pressure which gives you grip. When you take your foot off, releasing the pressure, they become smooth and slippery again making dirt attachment difficult. When the decks are wet, the traction increases even more.
Scrub the non-skid deck with SPEED CLEAN™ and a scrub brush and the smooth parts with a MARINE POWER MITT™. Rinse well and dry. Apply 2 coats of SURE STEP™ and buff to a beautiful shine with a SURE STEP BUFFING WHEEL™ on a portable drill.
Once your boat is properly protected, maintenance usually consists of keeping it clean by rinsing with clear water and wiping dry from time to time but if stuff happens, we’ve got you covered. If your boat gets soiled from greasy atmospheric fall out, diesel soot, scum line, or other nasties, wet it with water, spray on some free rinsing, biodegradable INFLATABLE BOAT CLEANER™, wash away the grime with a MARINE POWER MITT™ and wipe dry with a chamois or microfiber cloth.
Scuff marks or other dirt or stains that are difficult to remove can be scrubbed clean with SPEED CLEAN™. Rinse well, dry and re-apply POLY GUARD™ and REPELIN™ if applicable.
Even though your boat bottom is protected with REPELIN™, if it sits in the water for more than a few days you may see slime forming on the bottom. Simply wipe off the slime and the bottom will stay clean for months. If the boat sits in the water for long periods of time, without maintenance, marine growth may attach. Soft growth such as slime and algae can be removed with INFLATABLE BOTTOM SPRAY™. Hard growth, such as barnacles or zebra or quagga mussels can be removed with FOUL OFF™. Bottom cleaners can remove REPELIN™ and POLY GUARD™. After removing the growth, scrub with SPEED CLEAN™ and re-apply POLY GUARD™ and REPELIN™.
POLY GUARD™, REPELIN™ and SURE STEP™ have a life of 6 to 8 months in continental climates and 3 to 4 months in tropical climates. At the end of each period, scrub all surfaces with SPEED CLEAN™ and re-apply the protectors. Regular use of these products can extend useful life of your new RIB or Inflatable Boat, make maintenance easier and add value and pride of ownership to your boat.
Yes it can but it may discolor or streak the bottom paint or if the paint is unstable, it may remove it. Feedback that we have been getting from our customers is that the discoloration is minimal and often the color will revert back in a short time. In many cases there is no discoloration or streaking at all. Keep in mind that if you have growth on the bottom paint, it is probably exhausted and needs to be replaced, otherwise you would not have growth in the first place. Also, often times there are adhesion problems with bottom paints on inflatable tubes and if this is the case some of the bottom paint may be removed. As with all cleaners, you should do a test with in a small inconspicuous place first to make sure you are getting the results yo expect.
Inflatable Bottom Spray was formulated especially for inflatable boats. It is as strong as you should use to remove bottom growth, without damaging the fabric that the boat is made from.
The product is Repelin. Be sure to clean and prep the surface with Speed Clean and Poly Guard to protect your tubes and allow for patchability in the event of a puncture.
It works better in the north, where the water is not so warm and the growth so vicious. You will get a full season from two coats. In the Florida area, the bottom will start to slime up after about 3 to 4 weeks. Two coats should last 3 to 6 months if you keep it clean. If you leave it more than that, without wiping off the slime, you will start to get algae and barnacles attaching to the slime, but they are much easier to remove than if you do not protect your bottom.
If you have marine growth now, use Inflatable Bottom Spray to easily remove it without damaging the fabric or adhesives.
The product you want is Inflatable Bottom Spray. it was made especially for your application. Algex is for aluminum boats.
This is a frequent problem with boat owners that don’t do anything to protect the bottom of their inflatable and then leave them in the water or tow them behind their boats, when cruising. You should be able to get it looking new again.
REMOVES ALGAE, BARNACLES & ZEBRA MUSSELS FROM INFLATABLE BOAT BOTTOMS.
Safe to use on Hypalon, PVC & Fiberglass. Will not attack adhesives.
Shake well before using. Spray INFLATABLE BOTTOM SPRAY™ onto algae, mussels & barnacles. Allow chemical to work for 20-30 minutes. Agitate with brush and rinse clean. Repeat as necessary. Oxidation, chalking, scuffmarks, rust grime, oil, bird droppings, insect marks and most other stains can be removed with SPEED CLEAN™. When clean and dry, protect hypalon and PVC with POLY GUARD™ & fiberglass with VS721 BOTTOM COAT™ or PREMIUM BOAT SHINE™.
SHAKE WELL BEFORE USING
DO NOT FREEZE
Avoid contact with eyes, skin and clothing.
FIRST AID TREATMENT:
Contains phosphoric acid. If splashed in eyes or on skin, flush thoroughly with water. If swallowed, give three to four glasses of milk or water. DO NOT induce vomiting. Call physician immediately.
We Ship to 48 contiguous US States & Canada (Out areas call for Quote. Please note we do not ship to PO Boxes.) for a flat rate of only $10.95 delivered to your door.
When you order $100 or more.
For International Shipping Call for a quote.
AURORA INFLATABLE BOTTOM SPRAY ™
Catalog No: 01430
Individual Unit: 450 ml
Shipping Weight: 1.42 lb
Case Volume: 12 x 450 ml
Case Weight: 16 lb (7.26 kg)
Case Dimensions: 7.8″L x 10.3″W x 9.8″H
How to Use
How the Pros Do It
Locate a Dealer in Your Area
System Matched™ Products
Environment Safe Boat Care
Ask the Skipper: For All Your Boating Questions
Aurora Marine Club: Free Membership