GET FREE SHIPPING!
When you order
$250 $100 or more.
Out Areas: Call for a quote.
Every Inflatable Boat needs to be maintained and we wanted to make the process of boat maintenance much easier for you. INFLATABLE BOAT MAINTENANCE KIT™ will help you polish, protect, clean and restore your inflatable boat
INFLATABLE BOAT MAINTENANCE KITS™ will give you Guaranteed Results..
Our kit for inflatable boats gives your inflatable boat protection and a great look. Our kit includes a variety of our products for inflatable boats, and will definitely give you Guaranteed Results.
INFLATABLE BOAT MAINTENANCE KIT™ Products
Protects Your Inflatable Boat against UV damage, Dirt, Grime, Diesel, Soot, Stains, Bird Droppings and More. 2 Coats of Poly Guard Last 4-6 Months and You will get Luxurious, Long Lasting Shine.
Learn More About POLY GUARD™
Cleaner / RestorerThe Best Boat Cleaner that Quickly & easily Removes Stubborn Dirt, Grime, Stains, Oxidation & Scuffs From All Inflatable Boat Surfaces. Learn More About SPEED CLEAN™
The following YouTube video from the demo that we did at Hindson Marina, will show you the basic process of how to clean inflatable rib boats and apply a durable uv protectant.The products that we were demonstrating were SPEED CLEAN™ heavy duty inflatable boat cleaner also used to restore inflatable boat tubes and POLY GUARD™ uv protection for inflatable boats. The test boat they challenged us with was nasty. It looked like it had never been cleaned. The rubber rub rail was gummy and cracking. The tube was badly oxidized with scuff marks and years of ground in dirt.
We’ll let the video prove how well our inflatable boat cleaner and protectant worked to restore the neglected inflatable rib. First we wet the tube with water. We used a MARINE POWER MITT™ to reduce the amount of scrubbing. These things can cut the labor in half. Since I was elected to do the scrubbing I wanted all the help I could get. Next we applied SPEED CLEAN™ inflatable boat restorer to the mitt and started scrubbing away the dirt, stains, oxidation and scuffs from the inflatable tube. You can see the oxidation and dirt coming out. The scuffs and stains took a bit more scrubbing.
Can you see the difference. The tube is starting to get clean. It even looks brighter, almost like it did when it was new. There was only so much we could do for the rubber rub rail. It was already sticky and cracked. We’ll just clean it up and protect it with POLY GUARD™ uv protectant to prevent it from deteriorating further.
POLY GUARD™ is a 3rd generation uv protector made especially for inflatable boats and RIB tubes. It’s a green, water based product using the latest technology. It’s not greasy or slippery so it does’nt transfer onto your clothes and you don’t slide around on the tube like the older oil based protectants. Two coats lasts all season so it’s much more economical because you don’t have to spray on every week and it doesn’t wash off with water. In addition to UV protection it also protects against suntan lotion, food and beverage stains and even exhaust soot penetration.
Keeping your new RIB or Inflatable Boat clean and protected against environmental damage can easily double the useful life of your boat, keep it looking like the day you bought it, increase your pride of ownership and bring a much higher return when it comes time to trade up or sell.
Your boat will be expected to live and survive in the Marine Environment; the toughest environment on the planet. It will be under constant attack from dirt, grime, UV, infrared, suntan lotion, marine growth, bacteria, bird and spider droppings, scuffs, stains, ozone and more. A simple and regular maintenance regime can easily defeat these ravages, but you need the right specialty products and procedure to do the job. Failure to keep your boat clean and protected will result in it looking old and tired before its time, may void your warranty and is sure to bring additional problems that can be costly to repair.
Using the right products to care for your boat is important. Household, automotive and industrial products can often cause more harm than good and should not be used. Aurora Boat Care Products are specially formulated for optimum care and maintenance of RIB and Inflatable boats. They’re endorsed, recommended and used by the top boat manufacturers in the world. These products are safe to use on Hypalon, PVC, Polyurethane, Rubber, Fiberglass and Aluminum.
NOTE: Detailed instructions for use and application of all products are on the product labels and on www.AuroraMarine.com
This is the easiest and best time to protect your boat. Within a few months in the marine environment, an unprotected boat can become soiled, stained, fouled and begin to degrade, requiring restoration before it can be properly protected.
When the special fabric for your tube and inflatable floor was manufactured, lubricants and other chemicals were used and they remain on the surface of the fabric after the boat was manufactured. It’s important to strip them away before applying the UV protector otherwise poor adhesion and failure of the protector can result. Even though your boat is new and appears clean, scrub it well with SPEED CLEAN™ and a MARINE POWER MITT™ to remove these pollutants, rinse well and dry. When the tube and fabric floor is dry, apply 2 coats of POLY GUARD™. These products may also be used to protect rub rails and other rubber fitments.
If the boat is to remain in the water for more than 2 days at a time, apply REPELIN™ fouling release coating to all underwater fabric surfaces to reduce the attachment of marine fouling and make cleanup easier. REPELIN™ can also improve performance and reduce fuel consumption. These products are effective for use in salt as well as fresh water.
If your RIB is to remain in the water for more than 2 days at a time, protect the gel coat with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Gel coat is porous and REPELIN™ will seal the pores to prevent osmosis blisters.
New gel coat is coated with a mold release agent which can impair proper bonding of long lasting protective coatings. To ensure proper attachment of REPELIN™, the hull must be scrubbed with SPEED CLEAN™ and a MARINE POWER MITT™ to remove any pollutants, prior to application.
If your RIB is to remain in the water for more than 2 days at a time, protect the painted bottom with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Wash the surface first with INFLATABLE BOAT CLEANER™ to remove any pollutants and then apply 2 coats of REPELIN™. If the hull is raw aluminum, after washing as above, coat it first with ALUMETRON™ prior to applying REPELIN™.
The deck or floor surfaces of RIB’s either have a textured pattern or sand is imbedded in the gel coat, or paint, in order to provide traction and reduce slipping, especially when wet. Protecting them with wax or polish is not recommended as it can make them dangerously slippery. Left unprotected, the decks are susceptible to UV damage, soiling, staining and excessive scrubbing to keep them clean. SURE STEP™ is a pressure sensitive sealer and UV protective polish that utilizes Adaptive Reflex technology. It seals the surface, protects the New Boat shine and makes the decks easy to maintain and keep clean. When you step on the deck, your weight creates pressure which gives you grip. When you take your foot off, releasing the pressure, they become smooth and slippery again making dirt attachment difficult. When the decks are wet, the traction increases even more.
Scrub the non-skid deck with SPEED CLEAN™ and a scrub brush and the smooth parts with a MARINE POWER MITT™. Rinse well and dry. Apply 2 coats of SURE STEP™ and buff to a beautiful shine with a SURE STEP BUFFING WHEEL™ on a portable drill.
Once your boat is properly protected, maintenance usually consists of keeping it clean by rinsing with clear water and wiping dry from time to time but if stuff happens, we’ve got you covered. If your boat gets soiled from greasy atmospheric fall out, diesel soot, scum line, or other nasties, wet it with water, spray on some free rinsing, biodegradable INFLATABLE BOAT CLEANER™, wash away the grime with a MARINE POWER MITT™ and wipe dry with a chamois or microfiber cloth.
Even though your boat bottom is protected with REPELIN™, if it sits in the water for more than a few days you may see slime forming on the bottom. Simply wipe off the slime and the bottom will stay clean for months. If the boat sits in the water for long periods of time, without maintenance, marine growth may attach. Soft growth such as slime and algae can be removed with INFLATABLE BOTTOM SPRAY™. Hard growth, such as barnacles or zebra or quagga mussels can be removed with FOUL OFF™. Bottom cleaners can remove REPELIN™ and POLY GUARD™. After removing the growth, scrub with SPEED CLEAN™ and re-apply POLY GUARD™ and REPELIN™.
POLY GUARD™, REPELIN™ and SURE STEP™ have a life of 6 to 8 months in continental climates and 3 to 4 months in tropical climates. At the end of each period, scrub all surfaces with SPEED CLEAN™ and re-apply the protectors. Regular use of these products can extend useful life of your new RIB or Inflatable Boat, make maintenance easier and add value and pride of ownership to your boat.
Speed Clean is a heavy duty cleaner and restorer. On hypalon, use it when the boat is new to strip off the manufacturing lubricants before applying Poly Guard. Also use it to remove chalking or oxidation, scuff marks, stains or to restore older boats before applying Poly Guard. Use it with a Marine Power Mitt or sponge or scrub brush to get the tube pristine before rinsing. It has a heavy cream consistency.
Inflatable Boat Cleaner is a general purpose spray on cleaner for inflatable boats. Use this product when your boat just need a good general cleaning or to remove surface dirt and grime. Spray it onto the surface, agitate it with a Marine Power Mitt, sponge or scrub brush and rinse clean. Now you can apply Poly Guard. If oxidation, scuffs or stains remain, then use Speed Clean.
Speed Clean and Poly Guard do not contain oils, silicones and Teflon that can affect the adhesion of patches. Use Speed Clean to clean, restore and prepare the surface of the tube on your boat for proper adhesion of Poly Guard. If ever you have to strip Poly Guard, you can use Speed Clean to do this.
To prepare for patching, first strip the Poly Guard with Speed Clean and then follow the manufacturers directions for preparing the surface for the patch. This usually involves sanding or scuffing the surface and wiping with MEK or Toluene or another solvent to partially dissolve the fabric prior to applying the adhesive.
Poly Guard has excellent UV protection properties to protect against fading and chalking, plus it also protects against scuffing, staining and damage from suntan oil and diesel. It will also make maintenance much easier and facilitate the removal of exhaust soot, bird droppings etc. which seem to be a big problem for inflatable boats in general. You will love the low luster shine. Many people claim that it even improves the appearance of a brand new boat.
We Ship to 48 contiguous US States & Canada (Out areas call for Quote. Please note we do not ship to PO Boxes.) for a flat rate of only $10.95 delivered to your door.
When you order $100 or more.
For International Shipping Call for a quote.
INFLATABLE BOAT MAINTENANCE – STARTER KIT ™
Catalog No: 01470
INFLATABLE BOAT MAINTENANCE – DELUXE KIT ™
Catalog No: 01472
Locate a Dealer in Your Area
System Matched™ Products
Environment Safe Boat Care
Ask the Skipper: For All Your Boating Questions
Aurora Marine Club: Free Membership