How To Remove Barnacles from the Waterline of a Painted Hull
John W. asked:
Do you have a product that can help remove barnacles from the waterline of a fiberglass boat hull that has been painted with 2 part polyurethane marine paint?
Answer:
For your convenience, I’ve highlighted the hyperlinks. Click on the hyperlink to get more information about the selected product.
Hi John,
Barnacles and their adhesive are very tough to remove. You have two problems: 1) removing the barnacles mechanically (scraping) can also lift the paint. 2) using a chemical, strong enough to soften the barnacle shell and the adhesive, will also damage the paint. There is no way to remove the barnacles with a guarantee that the paint won’t be damaged, although, you may get lucky. There are different species of barnacles and their composition is also dependent on what’s in the water they live in and what they eat.
I suggest that you start with the least invasive way and if that doesn’t work, get more aggressive until the barnacles are removed. Because it’s only along the waterline; if the paint does get damaged, you can paint, or apply vinyl tape, along the waterline, to create a boot top, in a contrasting color. Two-part polyurethanes, such as Awlgrip or Imron, cannot be touched up without the patch being noticeable. Boot tops are common on boats and are considered sacrificial to deal with waterline problems such as growth, stains, fading, etc.
The most gentle bottom cleaner that we have is Algex®. It’s used for removing marine growth from aluminum and is also used on painted aluminum outdrives and painted RIB bottoms with success. You can try this by applying it directly to the barnacles and let it work for about 20 to 30 minutes, without letting it dry out. This should soften the barnacle enough so that it can be scraped off without lifting the paint. You will then have to do it again to soften and scrape off the adhesive rings. Some barnacles are tougher than others, so this may or may not work.
If that doesn’t work then you can try a much stronger barnacle remover, Algae Strip®. But, it can bite into the paint. Use the same technique as above. Direct scraping will most assuredly damage the paint and may also damage the gelcoat underneath.
Either way, do a test on an inconspicuous spot first before doing the entire boat.
After you remove the barnacles, I suggest that you protect your waterline, or boot top, with VS721®. It’s a foul release coating that makes it more difficult for marine growth to attach. If you wipe the slime from the waterline from time to time, as it appears, you won’t have any growth in future.
Thanks for your question,
Captain Aurora
Richard Kittar



