How much ALUMETRON do I need to coat my 25’ Tritoon?
Terry asked:
How much Alumetron is needed to coat my 25’ Tritoon?

Answer:
For your convenience, I’ve highlighted the hyperlinks in case you want more information about the products.
Hi Terry,
The amount of ALUMETRON® needed to coat a 25′ Tritoon depends on the total area, in square feet, of the pontoons. To make things easy for you, here’s a link to our Pontoon Calculator. All you need to do is type in the Length and Radius of the pontoons and it will automatically calculate the total square foot area you need to coat and then also calculate the amount of ALUMETRON® that you need. It will also calculate the amount of any other products that you may need for: cleaning, removing bio-fouling, buffing, restoring, prepping and anti-fouling, your pontoons.
Please NOTE: ALUMETRON® bonds chemically to raw, bare, aluminum. That’s why you can use it below the waterline and that’s why it can last up to 10 years. No other clear coat can do that. However, It’s important that the aluminum is perfectly clean and free from all pollutants for the ALUMETRON® to adhere properly.
All Aurora Boat Care Products are SYSTEM MATCHED®. They are designed to work well, one with the other to give you guaranteed results. The products and amount of preparatory work you need to do will depend on the age and condition of your pontoons. A new boat will require less work and product and older boat, especially if the pontoons have algae on the bottom, will require more. But, the good news is that even an older boat with fouled, stained and oxidized pontoons can be easily restored back to factory new and protected with ALUMETRON® to maintain the finish for up to 10 years. Not only will getting your boat pristine enhance your pride of ownership, but will also add considerable value to your boat when you decide to sell or trade up. Other pontoon boat owners have reported increasing the value of their boats by $5,000 to $20,000.
SOME ADDITIONAL INFORMATION:
Here’s some links to results other boat owners got:
Successfully Cleaning and Restoring Customer’s Pontoon Boat
Ken’s Bennington, looking Brand New again
And, links to our How To YouTube Videos:
HOW TO BLAST ALGAE OFF YOUR PONTOONS IN LESS THAN 20 MINUTES
How to Clean and Polish Pontoons in less than 60 Minutes.
Protective Clear Coat for Pontoons
If your boat is on a trailer, this is how you can Lift Your Boat Up Off the Trailer Bunks, to clean, polish and protect the bottom of the pontoons.
If you’re fortunate enough to have indoor storage or access to your pontoon boat over the winter, this is an excellent winter project. If you can get your boat cleaned, polished and protected during the off months, you’ll be ready to enjoy the summer on your boat, at the first opportunity.
Now, is also a good time to stock up on the products you’ll need in the spring, to get your boat pristine for the summer, before price increases and tariffs kick in. You’ll save a lot of money and be ready to work on your boat as soon as the weather breaks in the spring.
Thanks for your question,
Captain Aurora
Richard Kittar
The Skipper Recommends:
Related Posts:
- How to Lift Your Pontoon Boat off the Trailer Bunks
- Pontoon Calculator. How To Video. Free App.
- How to Protect a New Painted Aluminum Boat?
- Can I Use a Sander instead of Linear Buffer
- Product Coverage?
- Where Can I Buy Aurora Boat Care Products?
- What is shelf life of product?
- Aurora Products Safe to Use on Painted Surfaces?
- Where Can I Find out More About How to Use Products?






