• NOW WITH UV PROTECTION
• PROTECTS BOAT BOTTOM AGAINST: ALGAE, BARNACLES, ZEBRA MUSSELS AND OSMOSIS BLISTERS
• COVERAGE: 400sq. ft. ONE COAT (16oz bottle), 3200sq. ft. ONE COAT (1US Gal Jug)
• REDUCES HULL FRICTION FOR BETTER ACCELERATION, SPEED & FUEL ECONOMY
• CLEAR, SHINY FINISH
EASY TO APPLY:
Wipe on & buff for a super slippery, perfectly clear, protective barrier coat. 2 coats protect most boats all season.
VS721 BOTTOM COAT™ may be applied to fiberglass, aluminum, hard painted surfaces, outdrives, trim tabs, struts, through hull fittings, etc.
Surface must be clean and dry.
ALUMINUM BOATS & PONTOONS: Remove marine growth with ALGEX™. Clean & brighten with ALUMABRITE CBX® or buff with ALUMABUFF™. Protect with ALUMETRON™.
Apply VS721™ with a damp sponge or cloth. Make sure all the exposed surfaces and crevises are coated. Let dry and remove haze with a soft dry cloth. Apply a 2nd coat after 24 hours. Allow to cure for 48 hours before launching boat.
Movement of boat through water continuously cleans hull. Stationary boats may be cleaned periodically with a sponge or deck brush. At end of season or upon attachment of marine growth, pressure wash or use BOAT CLEAN PLUS™ with a sponge. Barnacles & zebra mussels may have to be scraped off. Remove glue residue with ALGAE STRIP™ or ALGEX™.
SHAKE WELL BEFORE USING
DO NOT FREEZE
KEEP OUT OF REACH OF CHILDREN
Contains Petroleum Distillates. In case of eye contact flush well with water. If swallowed, DO NOT induce vomiting. Call a Poison Control Center or doctor immediately.