Product: AURORA ALGEX™

Product Description

Aurora Algex is the world's first bottom cleaner that is Safe to use on Aluminum. It's ideal for removing algae, barnacles and zebra mussels from aluminum Pontoon Boats, Out Drives, Out Board Lower Units, Sail Drives, and Aluminum Fishing Boats. It can also be used on hard painted boats including fiberglass and wood.

It saves the time and drudgery of scraping and scrubbing and it gives proven results, every time. Guaranteed!

It's very easy to use. With the boat out of the water, spray Aurora Algex directly onto the fouled surface. Wait 15 minutes and rinse clean. In severe cases, it may be necessary to repeat. Soft and anti-fouled paints may be removed, so check on small inconspicuous spot first.

When the bottom is free of fouling, clean stained or oxidized aluminum with Aurora Alumabrite. Apply 2 coats of Aurora High Performance HP Bottom Wax to protect against future fouling.

Features & Benefits
  • Only cleaner of its kind - No competition.
  • Fast & Easy to Use. Spray & Rinse. No Hard Scrubbing or Scraping.
  • Safe for Aluminum Boats, Pontoons, Out Drives & Sail Drives.
  • Also works on Fiberglass & Wooden Boats.
  • Sold in Convenient Ready to Use Spray Bottle.
  • No- Fume Formula.
  • Dissolves Barnacles, Zebra Mussels & Algae in Minutes.
  • Easy to Sell. 100% Customer Satisfaction Guaranteed or their money back.
  • Promotes the sale of Alumabrite and HP Bottom Wax with VS721 for increased profit and customer satisfaction
Tips & Tricks - How the Pros Do It
  1. Be environmentally responsible. Clean the boat on land, away from the water.
  2. Test painted surfaces, especially anti fouling paints in a small inconspicuous spot, to make sure Algex does not remove it.
  3. Cleaning the boat when the fouling is fresh is faster and easier than waiting for it to dry.
  4. Wear eye protection, rubber gloves & protective clothing, just in case. Avoid skin contact.
  5. Spray on liberally, brush it around to ensure complete penetration and give the chemical time (15 minutes) to work before rinsing.
  6. Finish the job. When the fouling is removed, brighten the aluminum with Alumabrite. Apply 2 coats of Aurora HP Bottom Wax to improve performance and reduce future fouling.

What Others Say

"I can't believe Algex works as great as you said it would. We deal mostly with pontoon boats and nothing we have ever tried works as great as Algex!"
B. Kane - North Bend Marine

"I just had to write to let you know what a great product you have and tell you it's as good as you advertise it to be"
M. Cook - Port Colborne, ON

"Your products are the best!"
Glenda - Bryson's Marine

"It got all the crap off my stern drives and didn't even remove the paint. I'm totally amazed. Your Website was great. Found a Dealer less than 3 miles away"
B. Samson - Jupiter FL

TS#: 11150 June 2002     Go back...