AURORA MARINE INDUSTRIES INC. 7015 Ordan Drive, Suite 11 Mississauga ON L5T 1Y2 Telephone: (905) 564-4995 Fax: (905) 564-4956

SECTION 1:	PRODUCT INFORMATION
PRODUCT USE:	Waterline Stain Remover
CHEMICAL FAMILY:	Blended Product
MANUFACTURER'S / SUPPLIER'S NAME:	Aurora Marine Industries Inc.
STREET ADDRESS:	7015 Ordan Drive, Unit 11
CITY & PROVINCE:	Mississauga, Ontario
POSTAL CODE:	L5T 1Y2
EMERGENCY PHONE NUMBER:	(905) 564-4995 / (613) 996-6666 / *666 (cellular)

SECTION 2:	HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS:	Hydrogen Chloride	Phosphoric Acid	Oxalic Acid
PERCENTAGE BY WEIGHT:	15-40	0-5	0-5
UN, NA, OR CAS NUMBER:	7647-01-0	7664-38-2	144-62-7
LD OF MATERIAL:	Not Known	LD 50 (oral-rat): 1.53/kg	LD 50 (oral-rat): 375mg/kg
LC OF MATERIAL:	Not Known	Not Known	Not Known

SECTION 3:	PHYSICAL DATA
PHYSICAL STATE:	Liquid
APPEARANCE AND ODOUR:	Opalescent green liquid, mint odour.
ODOUR THRESHOLD (PPM):	NE
VAPOUR PRESSURE:	NE
VAPOUR DENSITY (AIR = 1):	>1
EVAPORATION RATE:	NE
BOILING POINT (°C):	NE
FREEZING POINT (°C):	<0°C
% VOLATILE (BY WEIGHT)	>90%
SOLUBILITY IN WATER (20°C)	Complete
PH:	<1.0
SPECIFIC GRAVITY:	1.130
DENSITY (GRAM/CC):	NA
COEFF - WATER / OIL DIST.:	NE

SECTION 4:	FIRE AND EXPLOSION DATA
FLAMMABILITY:	No
IF YES, UNDER WHICH CONDITIONS:
MEANS OF EXTINCTION:	As appropriate for the surrounding fire.
SPECIAL PROCEDURES:	Use protective clothing suitable for acids and self-contained breathing apparatus.
FLASHPOINT (°C) AND METHOD:	None
UPPER EXPLOSION LIMIT (% BY VOLUME)	NA
LOWER EXPLOSION LIMIT (% BY VOLUME)	NA
AUTO IGNITION TEMPERATURE (°C):	NA
TDG FLAMMABILITY CLASSIFICATION:	NA
HAZARDOUS COMBUSTION PRODUCTS:	Hydrogen chloride gas and other toxic fumes.
EXPLOSION DATA
UNUSUAL FIRE & EXPLOSION HAZARD:	Flammable hydrogen gas is generate by reaction with many metals.
SENSITIVITY TO IMPACT:	NA
SENSITIVITY TO STATIC DISCHARGE:	NA

SECTION 5:	REACTIVITY DATA
CHEMICALLY STABLE:	Stable under normal conditions.
IF NO, UNDER WHICH CONDITIONS:	Toxic acid fumes are generated at high temperatures.
COMPATIBILITY WITH OTHER SUBSTANCES:	No
IF NO, WHICH ONES?	Base metals, metal oxides, alkaline materials may react violently producing hydrogen gas and toxic fumes.
REACTIVITY, AND UNDER WHAT CONDITIONS:	Toxic fumes are generated by reaction with, alkalies, oxidants and many metals.
HAZARDOUS DECOMPOSITION PRODUCTS:	Hydrogen Chloride fumes, hydrogen gas.

SECTION 6:	TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY:
SKIN CONTACT:	Yes
SKIN ABSORPTION:	Yes
EYE CONTACT:	Yes
INHALATION ACUTE:	Yes
INHALATION CHRONIC:	Yes
INGESTION:	Yes
EFFECTS OF ACUTE EXPOSURE TO MATERIAL:	Can cause severe burns to eyes, skin, mucous membrane and upper respiratory tract.
Effects of chronic exposure:	Vapour causes tooth erosion, nose and gum bleeding, skin inflammation.
LD OF MATERIAL:	NE
LC OF MATERIAL:	NE
EXPOSURE LIMIT OF MATERIAL:	Hydrochloric Acid: TLV 5 ppm
IRRITANCY OF MATERIAL:	Severe irritant
SENSITIZING CAPABILITY OF MATERIAL:	Not known
CARCINOGENICITY OF MATERIAL:	None known
REPRODUCTIVE EFFECTS OF MATERIAL:	None known
SYNERGISTIC MATERIALS:	None

SECTION 7:	PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT:	Wear gloves and goggles when handling very small quantities during normal use. Use appropriate respirator if misty conditions prevail. Wear boots and apron in addition to face shields and gloves if handling large quantities.
GLOVES (SPECIFY):	Neoprene, PVC, rubber.
RESPIRATORY (SPECIFY):	Self-contained breathing apparatus if vapour or mist is present or if TLV is exceeded.
EYE(SPECIFY):	Splash proof safety goggles or full face shield.
FOOTWEAR (SPECIFY):	Impervious boots if handling large quantities.
CLOTHING (SPECIFY):	Eye bath, showers.
OTHER (SPECIFY)
ENGINEERING CONTROLS:	Provide mechanical ventilation of confined spaces.
LEAK AND SPILL PROCEDURE:	Zone off contaminated area. Ventilate. Wear protective gear. Only adequately trained persons should participate in the clean up. For small spills neutralize with soda ash or lime and wash down with large quantities of water. Alternatively, absorb on vermiculite, dry sand or a similar material.
WASTE DISPOSAL:	Dispose of through a licensed waste disposal facility equipment.
HANDLING PROCEDURES & EQUIPMENT:	Use trained personnel only. Wear suitable protective equipment.
STORAGE REQUIREMENTS:	Store in a separate, well ventilated cool, dry area.  Keep containers tightly closed when not in use.
SPECIAL SHIPPING INFORMATION:	Hydrochloric Acid Solution:  Class 8 (9.2), PIN 1789 P.G. II.

SECTION 8:	FIRST AID MEASURES
STATEMENT OF CAUTION:	Corrosive product. Obtain medical attention immediately for all exposures.
INHALATION:	Remove to fresh air. Apply artificial respiration if necessary. Call a physician.
EYE CONTACT:	Flush with copious amounts of water for at least 15 minutes. Call a physician immediately.
SKIN CONTACT:	Flush with soap and water for at least 15 minutes.  Call a physician. Do not induce vomiting. Rinse mouth with water. Drink large quantities of milk or water. Do not give anything by mouth if victim is unconscious. Call a physician immediately.

SECTION 9:	PREPARATION INFORMATION OF THE MSDS
PREPARED BY:	Lab Group	LEGEND:
PHONE NUMBER:	905-564-4995	NA = Not Applicable
SOURCES USED FOR INFORMATION:	Information from: CCOHS and Suppliers	NE = Not Established
REVIEWED & ISSUED:	March 22, 2007	ND = Not Determined
		EST = Estimated

The information provided in this Material Safety Data Sheet has been obtained from sources believed to be reliable. The supplier provides no warranties express or implied and assumes no responsibility for the accuracy or the completeness of the data contained herein.