AURORA MARINE INDUSTRIES INC. 7015 Ordan Drive, Suite 11 Mississauga ON L5T 1Y2 Telephone: (905) 564-4995 Fax: (905) 564-4956

SECTION 1:	PRODUCT INFORMATION
PRODUCT USE:	Cleaner
CHEMICAL FAMILY:	Blended Product
MANUFACTURER'S / SUPPLIER'S NAME:	Aurora Marine Industries Inc.
STREET ADDRESS:	7015 Ordan Drive, Unit 11
CITY & PROVINCE:	Mississauga, Ontario
POSTAL CODE:	L5T 1Y2
EMERGENCY PHONE NUMBER:	(905) 564-4995 / (613) 996-6666 / *666 (cellular)

SECTION 2:	HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS:	Sodium Hydroxide
PERCENTAGE BY WEIGHT:	10-30%
UN, NA, OR CAS NUMBER:	1310-73-2
LD OF MATERIAL:	LD50 (oral-rabbit):  500 mg/kg
LC OF MATERIAL:	Not Known

SECTION 3:	PHYSICAL DATA
PHYSICAL STATE:	Liquid
APPEARANCE AND ODOUR:	Clear orange liquid.
ODOUR THRESHOLD (PPM):	NA
VAPOUR PRESSURE:	NE
VAPOUR DENSITY (AIR = 1):	NE
EVAPORATION RATE:	Same as water
BOILING POINT (°C):	100°C (EST)
FREEZING POINT (°C):	0°C (EST)
% VOLATILE (BY WEIGHT)	>85%
SOLUBILITY IN WATER (20°C)	Soluble
PH:	1% Solution:  12.6-13.0
SPECIFIC GRAVITY:	1.135
DENSITY (GRAM/CC):	NA
COEFF - WATER / OIL DIST.:	NE

SECTION 4:	FIRE AND EXPLOSION DATA
FLAMMABILITY:	No
IF YES, UNDER WHICH CONDITIONS:
MEANS OF EXTINCTION:	As appropriate for the surrounding fire.
SPECIAL PROCEDURES:	Water spray may be used to keep containers cool.
FLASHPOINT (°C) AND METHOD:	No flash at boiling.
UPPER EXPLOSION LIMIT (% BY VOLUME)	NA
LOWER EXPLOSION LIMIT (% BY VOLUME)	NA
AUTO IGNITION TEMPERATURE (°C):	NE
TDG FLAMMABILITY CLASSIFICATION:	NA
HAZARDOUS COMBUSTION PRODUCTS:	Caustic fumes.
EXPLOSION DATA
UNUSUAL FIRE & EXPLOSION HAZARD:	NA
SENSITIVITY TO IMPACT:	NA
SENSITIVITY TO STATIC DISCHARGE:	NA

SECTION 5:	REACTIVITY DATA
CHEMICALLY STABLE:	Yes
IF NO, UNDER WHICH CONDITIONS:
COMPATIBILITY WITH OTHER SUBSTANCES:	No
IF NO, WHICH ONES?	Acidic substances.
REACTIVITY, AND UNDER WHAT CONDITIONS:	May react with zinc, aluminum, etc., liberating flammable hydrogen gas.
HAZARDOUS DECOMPOSITION PRODUCTS:	Caustic fumes.

SECTION 6:	TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY:
SKIN CONTACT:	Yes
SKIN ABSORPTION:	Yes
EYE CONTACT:	Yes
INHALATION ACUTE:	Yes
INHALATION CHRONIC:	Yes
INGESTION:	Yes
EFFECTS OF ACUTE EXPOSURE TO MATERIAL:	May cause burns to skin, eyes and mucous membranes.
Effects of chronic exposure:	Irritation of respiratory tract, inflammation of lungs.
LD OF MATERIAL:	NE
LC OF MATERIAL:	NE
EXPOSURE LIMIT OF MATERIAL:	Sodium Hydroxide:  TLV Ceiling 2 mg/m (dust).
IRRITANCY OF MATERIAL:	Irritant
SENSITIZING CAPABILITY OF MATERIAL:	Not known
CARCINOGENICITY OF MATERIAL:	Not known
REPRODUCTIVE EFFECTS OF MATERIAL:	Not known
SYNERGISTIC MATERIALS:	Not known

SECTION 7:	PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT:	Wear gloves and goggles when handling very small quantities during normal use. Use appropriate respirator if misty conditions prevail. Wear boots and apron in addition to face shields and gloves if handling large quantities.
GLOVES (SPECIFY):	Neoprene, PVC, rubber.
RESPIRATORY (SPECIFY):	Self-contained breathing apparatus if vapour or mist is present or if TLV is exceeded.
EYE(SPECIFY):	Splash proof safety goggles or full face shield.
FOOTWEAR (SPECIFY):	Impervious boots if handling large quantities.
CLOTHING (SPECIFY):	Neoprene, PVC or rubber apron if handling large quantities.
OTHER (SPECIFY)	Eye bath, showers.
ENGINEERING CONTROLS:	Provide mechanical ventilation of confined spaces.
LEAK AND SPILL PROCEDURE:	Zone off contaiminated area. Ventilate. Wear protective gear. Only adequately trained persons should participate in the clean up. For small spills neutralize with soda ash or lime and wash down with large quantities of water. Alternatively, absorb vermiculite, dry sand or a similar material.  Shovel into Containers for disposal.
WASTE DISPOSAL:	Dispose of through a licensed waste disposal facility.
HANDLING PROCEDURES & EQUIPMENT:	Use trained personnel only. Wear suitable protective equipment.
STORAGE REQUIREMENTS:	Store in a separate, well ventilated, cool, dry area. Keep containers tightly closed when not in use.
SPECIAL SHIPPING INFORMATION:	Sodium Hydroxide Solution:  Class 8 (9.2), PIN 1825, PG II.

SECTION 8:	FIRST AID MEASURES
STATEMENT OF CAUTION:	Corrosive product. Obtain medical attention immediately for all exposures.
INHALATION:	Remove to fresh air. Apply artificial respiration if necessary. Call a physician.
EYE CONTACT:	Flush immediately with copious amounts of water for at least 15 minutes. Call a physician immediately.
SKIN CONTACT:	Flush with soap and water for at least 15 minutes. Call a physician.
INGESTION:	Do not  induce vomiting. Rinse mouth with water. Do not give anything by mouth if victim is unconscious. Contact a physician immediately.

SECTION 9:	PREPARATION INFORMATION OF THE MSDS
PREPARED BY:	Lab Group	LEGEND:
PHONE NUMBER:	905-564-4995	NA = Not Applicable
SOURCES USED FOR INFORMATION:	Information from: Suppliers, ACGIH, CCOHS	NE = Not Established
REVIEWED & ISSUED:	March 22, 2007	ND = Not Determined
		EST = Estimated

The information provided in this Material Safety Data Sheet has been obtained from sources believed to be reliable. The supplier provides no warranties express or implied and assumes no responsibility for the accuracy or the completeness of the data contained herein.